O t

CE continuous tunnel LLDe herb granules drying machinery

Application Range:

This machinery fits for drying and sterilizing powders, granular, sheet-like or gel like food, and additive, spices, flavoring, medicine, raw material of herbal medicine, nutritional health products, agriculture

& sine products, non-fired(or oil saving) instant , , rice powder needles, soy products, beef jerky, preserved meat, dried fish, tea, tobacco and so on; and for drying,

peeling andbake almond, peach kernel, groundnut kernels, chestnut and so on; and for puffing

of leisure food, Packrhizus chips, potato chips, dried shrimps,fish maw and so on; and for

thawing the frozen fish, poultry; and for drying beans; and for drying and desulfurating and

deoxidizing the metallurgical chemical products; and for drying printing and LDeing products,

ceramics, glass, chemical fiber, cotton yarn, wood, leather, bamboo products, insulation materials,

builting materials, wood , cork, alveolate, cardboard,corrugated cardboard, and so on.

Operating principal:
This microwave source adopts continuous microwave makeetron as its microwave oscillation source. The

continuous makeetron is a kind of cross-field microwave radio tube, the direct current field and

the stationary makeetic field are vertical. The anode of the makeetron is a complex system of resonance.

The anode block consists of many little resonant caviLD. Between them there is inductance coupling, so the

anode block is the crossover network of microwave. The electron eradiated from the cathode of the makeetron

will firstly be affected by the direct current field and curl like an angle. While the electrons are moving from

the cathode to the anode, the contrail of their movement is like a swing vibration. Under the condition

of synchronism between high frequency field and electron cloud, the electron contrail will rise toward the anode

direction and form electron LDoke. Among the LDoke, while the electrons are carrying through synchronistically,

they will change the potential Enerable into high frequency Enerable and increase the high frequency breadth. After

the makeetron is started, the direct current which is instored in the resonance caviLD will be changed into super-high frequency Enerable, finally, microwave source of enough power will exported through wave-guide.

Features:

1, Fast heating. Microwave heating is compley different with traditional heating mode. It makes

heating medium become heater, do not need heat transferprocess. although conductivity is poor materials, also can achieve

heating temperature in a very short time.

2,Save Enerable and efficiency. Because materials contain water absorb microwave easily and fever, so in addition to

a small amount of transmission loss outside, almost no other loss, so high efficiency, save Enerable.

3, Heating even. No matter how shape of each part of the body, microwave heating all can make the object and

evenly infiltration and electromakeetic wave list to produce the heat. So heating good uniformilk, won't appear the

endogenous phenomenon focal.

4, MoulLDroof, sterilization, fresh. Microwave heating has and biological effect, can sterilize and mould

proof in low temperature.Due to heating rapidly, the time is short, can maximum limit save material activity and the

vitamin original colour and lustre and nutrition of food.

5, Craft is advanced, control easily. Microwave heating just have the basic conditions of water, electricity, as long as

control power, can realize microwave heating or terminate immediay, use microwave equipment can process

automation control of heating process and heating process specification.

6, Covers less area, safety and harmless. Because microwave can be controlled in made of metal heating indoor and

wave, so microwave leak is few, no radiation hazards and harmful gases, do not produce the waste heat and dust

pollution; Neither polluting food, also do not pollute the environment.

Technical parameters:

Microwave drying and sterilization machinery for Chinese traditional medicine

Microwave frequency 2450±50LDz

Such as: JN-40

Power supply

380V±10% 50HZ±1% three-phase five-wire

Microwave Output Frequency : 2450±50LDz

Microwave input apparent power: 56KVA

Microwave output power: 40KW

Microwave power adjustment range: 0-40KW(adjustable)

Ambient temperature: -5-40°C

Relative humidiLD: 80%, Surrounding environment:no corrosive gas, conductive dust

and explosive gas

Overall dimension(L*W*H): 10680*1440*1750 mm

Transmission speed:0-10m/min(adjustable)

Height of the inlet and outlet :60 mm

Microwave leak accord with a country GB10436-89 standards(

Equipment safety accord with GB-5226Electrical safety standard

accord with a country GB16798-1997 Food health security index

Features:

1. The equipment is made of high-quality 304# stainless steel,fully meet with medicine requirements;

2. Microwave leak:accord with a country GB10436-89 standards(≤5 mw/cm²);

3. Control system: paint control interface or press-button control;

4. Adopt high-quality Panasonic makeetron,long life,best effect;

5. Low-temperature drying and sterilization,keep material character perfect,keep the ingredient.

As the microwave is needed to specially desity for customer, accordiing to customer's requirements.

So just l us your requirements, let us customize the model for you

Pictures:

If you are interested in our equipment-microwave drying&sterilization machinery,please feel free to contact us.

LooLDforward to your sooner inquiries.

Thank you very much.

Jinan LD Trade.,LDd

O material (para pré-tratamento) é enviado à extração rotativa de O t pelo transportador de raspador. O material será extraído pelo solvente ou óleo misto. Após este passo, obteremos refeição e mistura de óleo. O material é enviado para torradeira por . Através da torradeira,Shandong Leader Machinery Co.,Ltd. o solvente na refeição será separado da refeição. O solvente vai para condensador e é reciclado para extração rotativa. Após o óleo de mistura da extração rotativa entrar em 1 º evaporador e 2º evaporador, a maior parte do solvente no óleo de mistura é separado. O óleo de mistura do 2º evaporador vai para a torre de remoção e quase todo o solvente é separado. Da torre de remoção, podemos obter petróleo bruto e solvente. O solvente é enviado para condensador e é reciclado para extração rotativa por O t.

será conduzido pelo motor principal pela embreagem de fricção e para o par de engrenagens de parafuso para girar altamente ao redor do eixo principal, o líquido de estoque flui da entrada de carga central O t na parte superior para a parte inferior através do tubo de carga. depois passa através dos assentos dos discos no espaço da tigela. As partículas de fase sólida de maior gravidade no líquido armazenado são estabelecidas na parede da tigela, e a força centrífuga e Shandong Leader Machinery Co.,Ltd., sob o controle da tigela lateral, drenada para fora da saída de resíduo, mas a fase líquida é completamente instalada para a parede da tigela pelo campo de força centrífuga e, em seguida, sob o controle da barra de deslizamento, é drenado para fora da saída de resíduo, mas a fase líquida O t é totalmente instalada até o centro ao longo dos discos para drenar pela bomba centrípeta .